Map Every Door First
List every door, who needs to open it, and whether they need access independently or only alongside someone else. A physical floor plan with access notes is more useful than a spreadsheet when you are working through the logic.
A master key system lets the right people open the right doors and nobody else. If you manage a building in Moore, OK and keys are already out of control, this page explains how the system works, what it costs to set up, and what questions to ask before you commit to one.
How the system works
Most people understand the concept. Fewer understand how the cylinder is engineered to make it possible, and that gap leads to poor purchasing decisions.
Every lock cylinder has a set of pin stacks. In a standard lock, one key cuts align all those stacks to a single shear line. A master-keyed cylinder has a second shear line cut into each pin stack, so two different keys can each work the same lock.
The change key opens only that one lock. The master key opens every lock in the system. A grand master sits above that, and a great grand master above that if the building is large enough to need it. The hierarchy is built into the cylinder at the time of pinning.
The trade-off is real: every additional shear line you add to a pin stack is also an additional point of vulnerability. Cheap cylinders with shallow key ways and loose tolerances can sometimes be manipulated to find those extra shear lines. This is why the quality of the cylinder matters more in a master key system than in a single-keyed lock.
For most Moore commercial properties, a high-security commercial lock with restricted keyways is worth considering alongside or instead of a standard master key system, depending on your key control priorities.
Is it right for your property?
Moore's commercial corridor along SW 19th Street and the multi-tenant buildings near the Moore Norman Technology Center are exactly the kind of properties where key management becomes a real operational problem.
If a manager needs access to six offices but each office tenant should only open their own door, a master key system is the straightforward answer. You pin each cylinder to accept both the tenant's change key and the manager's master. No extra hardware, no electronic credentials required.
Moore businesses near the I-35 corridor see the same turnover patterns as anywhere in the OKC metro. Every time an employee leaves with a key, you have two choices: rekey the locks or accept that someone has access. With a well-documented master key system, rekeying a single zone costs less and takes less time than replacing every cylinder.
Oklahoma law does not mandate rekeying between tenants, but it is standard practice and the right thing to do. A master key system means a maintenance tech carries one key for the whole property while each unit tenant has a change key that opens only their door. When a tenant moves out, only that unit's cylinder gets rekeyed, and the master still works unchanged.
Planning the system
The design phase is where mistakes happen. Fixing a poorly planned system after the cylinders are installed costs more than planning it correctly from the start.
List every door, who needs to open it, and whether they need access independently or only alongside someone else. A physical floor plan with access notes is more useful than a spreadsheet when you are working through the logic.
A small office might need only a change key and a master. A school or clinic in Moore with separate wings might need a grand master, zone masters, and change keys. Every level you add increases pinning complexity and should be justified by a real operational need.
The keyway is the profile cut into the face of the cylinder. A restricted keyway means keys can only be duplicated by licensed dealers with the right bitting authorization. This is the single most important key control measure in a master key system.
If you have twelve doors today and might have twenty in two years, the key series needs enough unused combinations to accommodate new locks. Running out of combinations mid-expansion forces a complete rekey of the system.
Record which key works which doors, who holds each key, and when each key was issued. This is not paperwork for its own sake. It is how you know what to rekey when a key goes missing.
ANSI Grade 1 cylinders are the minimum for any commercial master key system worth installing. Grade 2 is acceptable for low-traffic interior doors. Grade 3 belongs on residential entry doors, not on a commercial master key ring. See master key systems for Oklahoma City offices and apartments for more detail.
What the work involves
I am Eran Bar-Yamin, license number A465149. I do this work myself. Here is what the process looks like start to finish.
I walk the property with you, note every cylinder, and draft a key schedule that shows the access levels before any hardware is ordered. This is the document you approve before anything is pinned.
I specify cylinders compatible with your existing hardware where possible, which keeps costs down. If your current locks are worn or a mismatch for the keyway we select, I will tell you that upfront with a price, not after the job is started.
Pinning is done on-site or pre-pinned depending on the cylinder count and scheduling. Most small commercial systems, ten to twenty doors, take a half day to a full day to install and test. Larger multi-building systems may take two visits.
You receive a documented key record showing every key cut, every door it operates, and every person it was issued to. Keep that document somewhere secure. It is the foundation of your key control program going forward.
Call and we talk through the scope before anything is quoted or ordered.
Common questions
It depends on the number of doors, the cylinder grade, and whether existing hardware can be rekeyed or needs to be replaced. A small office with six to eight doors on standard ANSI Grade 1 cylinders will cost less than a twenty-door apartment property using restricted keyway hardware. I give you an itemized quote after a site visit or a detailed phone conversation, not a ballpark number pulled from the air. The price quoted is what goes on the invoice.
Sometimes, yes. It depends on whether the existing cylinders are compatible with the keyway we select for the system and whether they are in good enough condition to repin. Worn cylinders often need replacing regardless of the master key plan. I will tell you which ones during the walkthrough rather than after the work starts.
The master key level needs to be rekeyed. A missing change key might only affect one door. A missing master affects every door in the system. This is why a restricted keyway matters: if the key cannot be duplicated at a hardware store, the risk window is narrower and you have more time to act. But rekeying is still the correct response when a master goes unaccounted for.
A system with ten to twenty doors typically takes a half day to a full day on-site, assuming the cylinder order arrives before the appointment. Larger properties or those requiring custom hardware may need two visits. I schedule Moore and the south OKC metro on the same routes, so availability is generally the same week you call during our 24-hour, seven-day schedule.
They solve different problems. A mechanical master key system is lower cost to install, requires no power, and needs no software or credentials management. Electronic access control lets you add and remove access instantly without a locksmith, audit who opened what door and when, and issue time-limited credentials. Many Moore properties use both: mechanical cylinders as a backup and for low-traffic areas, electronic access on main entries. I can help you think through the trade-offs for your specific building, including pairing mechanical cylinders with high-security commercial locks for the perimeter.
Yes. Oklahoma requires locksmith licensing under the Oklahoma Locksmith Licensing Act. My license number is A465149, issued through the Oklahoma Council on Law Enforcement Education and Training. Always ask any locksmith working in Oklahoma for their license number before they start work. A legitimate operator will give it without hesitation.
Related reading
Pages that answer related questions for Moore and OKC metro customers.
Full breakdown of master key system planning for multi-tenant and commercial properties across the OKC metro.
When a standard master key system is not enough and restricted keyway or UL-listed hardware is the right call.
Cost and process comparison for car key replacement, relevant if your fleet vehicles are part of a facility key management plan.
Detailed side-by-side of dealership and locksmith options for vehicle key replacement in Oklahoma City.
How chip key programming works and what it costs compared to going through a dealer.
Options for replacing a lost car key in the OKC metro without a dealership appointment or dealership pricing.
Written by Eran Bar-Yamin, Owner & Licensed Locksmith
Free estimate, no obligation
Family owned in Edmond, working the OKC metro since 2018. Tell us where the job is and what needs doing.
(405) 696-0875Locked out right now? Calling is faster.Open 7 days, 24 hours a day. Requests in business hours get a reply in under 15 minutes.